Menu
TWO-WAY WIRELESS SYSTEM
The ABAX 2 family of wireless products is used for facility security – both indoor, and outdoor. These devices can also be successfully used to implement building automation. As a result, they enable a unique combination of safety and comfort.
Many uses
ABAX 2 is a perfect wireless solutions for the INTEGRA, INTEGRA Plus and VERSA control panels. Combined, they grant users more possible uses. ABAX 2 is also compatible with any other control panel or automation controller, and in some cases can operate fully autonomously.
Two-way radio communication – with all sent messages acknowledged by the system – combined with the AES standard for data encryption, grant ABAX 2 the similar level of reliability of data delivery that was previously only achieved by regular wired installations.
Advanced power-saving mechanisms enable long-term operation of battery-powered devices – in some cases even up to 8 years.
ABAX 2 system
is for you if:
You don’t have the time or simply don’t want to carry out renovation works
ABAX 2 is a fast and non-invasive way to build a reliable security system
You often change your interior design
It is way easier to move wireless devices to another place, compared to wired devices – no cabling must be run to a new location.
You need to expand your system with new functions
You can expand the installation whenever you want. With ABAX 2, you can easily add more devices to an already existing system, extending its scope of protection, or adding more functions.
You value quality and care about details
All SATEL products go through a multi-stage quality control. We also take care to ensure that our devices are manufactured in compliance with high environmental protection standards.
You expect safe and reliable solutions
Devices operating within the ABAX 2 system meet the requirements of safety standards (EN 50131 Grade 2).
* Depending on the product and its operation condition, the battery can last up to 8 years with ECO mode enabled.
FACTS ABOUT THE ABAX 2 WIRELESS SYSTEM
- The ABAX 2 system is characterised by its long radio communication range – up to 2000 m in open field. This is 4 times longer than the range of its predecessor – the ABAX system.
- In ABAX 2 the so called diversification of transmission channels has been applied – 4 separate channels have been separated within the frequency band used by the system. The level of interference is continuously monitored, and the communication is performed using the channel which has the lowest noise level at a given moment. Therefore, communication between the devices is both efficient and reliable. In comparison with other wireless systems, ABAX 2 is more resistant to jamming attempts.
- Compared with other wireless systems, the operating time of battery-powered ABAX 2 devices has been extended. Some of them can operate continuously for up to 8 years, and when a battery runs low, the system issues a notification.
- Data transmission between the ABAX 2 devices is much faster. Compared to the legacy ABAX system, this speeds up the entire system operation, and allows to manage more devices in the same area.
- The ABAX 2 system devices can also be used to implement building automation functions.
See how the ABAX 2 system works
ABAX 2 wireless system
Zadaniem bezprzewodowego systemu ABAX 2 jest ochrona obiektu – zarówno budynku, jak i terenu wokół niego. System ten można z powodzeniem wykorzystać także do realizacji automatyki budynkowej.
Play Video
ABAX 2 wireless system
The ABAX 2 wireless system protects entire facility – both the indoor and outdoor areas.
AES encryption
AES, or Advanced Encryption Algorithm, is one of the safest data encryption standards.
Play Video
AES encryption
AES, or Advanced Encryption Algorithm, is one of the safest data encryption standards.
Four ABAX 2 communication channels
Do you know why communication between individual devices of a two-way wireless ABAX 2 system is so effective, fast and secure?
Play Video
Four ABAX 2 communication channels
Do you know why communication between individual devices of a two-way wireless ABAX 2 system is so effective, fast and secure?
Wireless safety and comfort
Your safe space
New secured areas
Wanted to have more space for your hobbies, so you renovated your previously unused attic? Or built a new garage or a greenhouse next to your home? Don’t forget to secure these new areas! Either install a new intruder alarm system or extend your already existing one. With ABAX 2, installing new devices is both quick and easy, and saves you from having to carry out renovation works.
Last minute intruder alarm
With your summer holidays approaching, you probably wish to secure your home even more. Or perhaps you don’t even own an intruder alarm system yet? When busy with work and other responsibilities, you might not have enough time to even give it a thought. But don’t worry, it is never too late. With a professional security systems installer, setting up a new ABAX 2 installation takes little time, enough for you to prepare for your well-deserved vacation.
Stay secure
Planning changes in your home or garden arrangement? Or have you already started carrying them out? Making a change in the already existing architectural layout can hinder the reliable operation of your intruder alarm system. That’s why it’s so important to consult a professional installer when making changes within supervised areas, like redesigning gardens, rearranging furniture, or when carrying out any major renovation works. This ensures your installation remains effective, and all the system devices function properly. If needed, you can change the location of these devices, or add new ones.
Higher security, lower bills
Lighting
Do you sometimes forget to turn off the lights in your room or bathroom when leaving home? These lights left on unnecessarily consume energy, but don’t worry, we got a solution to this. When the intruder alarm system is armed, the ASW-210 wireless controllers installed in the junction boxes under the light switches automatically switch off the power supply to the lamps. The ADD-200 and AOD-210 wireless detectors with their built-in twilight sensors can control the outdoor lighting, turning it on only after dark. During mornings, the detectors inform the control panel that it’s bright enough outside to turn off the outdoor lighting. Connected lights can also be switched on and off remotely, using, for example, a mobile app – the same that you use to control your intruder alarm system.
Lighting
Do you sometimes forget to turn off the lights in your room or bathroom when leaving home? These lights left on unnecessarily consume energy, but don’t worry, we got a solution to this. When the intruder alarm system is armed, the ASW-210 wireless controllers installed in the junction boxes under the light switches automatically switch off the power supply to the lamps. The ADD-200 and AOD-210 wireless detectors with their built-in twilight sensors can control the outdoor lighting, turning it on only after dark. During mornings, the detectors inform the control panel that it’s bright enough outside to turn off the outdoor lighting. Connected lights can also be switched on and off remotely, using, for example, a mobile app – the same that you use to control your intruder alarm system.
Electrical appliances
Controlling the devices connected to electrical sockets (with the ASW-200 smart plugs in) helps you to save energy. Devices that do not need to be on, automatically switch off (for example, when arming the alarm system), or remotely, thus reducing energy consumption to a minimum.
Electrical appliances
Controlling the devices connected to electrical sockets (with the ASW-200 smart plugs in) helps you to save energy. Devices that do not need to be on, automatically switch off (for example, when arming the alarm system), or remotely, thus reducing energy consumption to a minimum.
Heating
The ADD-200 and AXD-200 detectors (when working in the temperature detector mode) can report any instance of temperature exceeding the set thresholds. This contributes to more efficient operation of heating and air conditioning systems. When the room gets colder, the alarm control panel can automatically switch the heating on. When the temperature reaches the set level, heating is turned off. When ABAX 2 is integrated with the INTEGRA Plus control panel, the information about the temperature measured by other wireless system devices (with a built-in temperature sensor) can also be used for controlling the heating or air-conditioning system.
When AXD-200 is working in the magnetic contact detector mode it can point opened windows – when you want to air the rooms, the control panel can turn off the heating there to avoid wasting energy.
When AXD-200 is working in the magnetic contact detector mode it can point opened windows – when you want to air the rooms, the control panel can turn off the heating there to avoid wasting energy.
Heating
The ADD-200 and AXD-200 detectors (when working in the temperature detector mode) can report any instance of temperature exceeding the set thresholds. This contributes to more efficient operation of heating and air conditioning systems. When the room gets colder, the alarm control panel can automatically switch the heating on. When the temperature reaches the set level, heating is turned off. When ABAX 2 is integrated with the INTEGRA Plus control panel, the information about the temperature measured by other wireless system devices (with a built-in temperature sensor) can also be used for controlling the heating or air-conditioning system.
When AXD-200 is working in the magnetic contact detector mode it can point opened windows – when you want to air the rooms, the control panel can turn off the heating there to avoid wasting energy.
When AXD-200 is working in the magnetic contact detector mode it can point opened windows – when you want to air the rooms, the control panel can turn off the heating there to avoid wasting energy.
Complete and reliable protection
Perimeter protection
The AOCD-260 outdoor curtain detector can be used along property boundaries, fences, windows and building entrances. The ACD-220 curtain detector can be installed on the inside of windows and doors and in passageways inside the house. Windows or doors can also be protected with the AXD-200 universal detector, working as a magnetic contact or shock detector. In heavily glazed areas it is worth installing AGD-200 glass-break detectors.
Indoor protection
The APD-200 PIR motion detectors can be used to protect the interiors. However, there are places (e.g., a living room with a fireplace, a boiler room, a vestibule, a garage) where sudden temperature changes or air movement may occur. In such rooms the APMD-250 dual detectors, which are equipped with sensors of two types: infrared and microwave, will do better. Both devices have the Pet function, so your dog will be able to move freely around the rooms secured by the armed alarm system.
Corridors and other indoor passages can be supervised by the AOCD-260 curtain detectors, and the AXD-200 magnetic contact detectors.
Valuable items can be additionally protected by the AXD-200 detectors operating in reorientation mode. For example, if someone removes a painting from the wall, the control panel is alarmed.
Corridors and other indoor passages can be supervised by the AOCD-260 curtain detectors, and the AXD-200 magnetic contact detectors.
Valuable items can be additionally protected by the AXD-200 detectors operating in reorientation mode. For example, if someone removes a painting from the wall, the control panel is alarmed.
Additional protection
The ASD-200 smoke and heat detector and the ASD-250 smoke detector (certified according to EN 14604 for standalone detectors) respond at the first sign of fire. You should also install an ACMD-200 carbon monoxide detector in your home, that senses the concentration of this dangerous gas, and triggers an alarm. For water leakage detection you can use the AXD-200 universal detector, featuring a flood detector mode (after connecting the FPX-1 flood probe). To call for help, use the APB-200 panic button, that when pressed, alarms selected public services or security agencies of a home emergency, such as a burglary.
Home automation
Building automation functions can be performed with the ASW-200 smart plugs,
and the ASW-210 wireless controllers, or with the ACX-210 or ACX-220 wired input and
output expanders. These can control other connected devices, such as lights, roller blinds or sprinklers.
ADD-200 and AOD-210 detectors can also be used in building automation. With their integrated twilight sensors, the system can employ them to control lighting.
The ADD-200 and AXD-200 temperature detectors, when operating in the corresponding mode, can inform the connected alarm control panel about the temperature exceeding the preset thresholds. In turn, the alarm control panel can respond with a programmed action, adjusting the heating level in the rooms to the expectations of household members. When the ABAX 2 system is integrated with the INTEGRA Plus alarm control panel, the temperature information sent by other devices of the wireless system (most of them feature a built-in temperature sensor) can also be used for controlling a heating/air conditioning installations.
ADD-200 and AOD-210 detectors can also be used in building automation. With their integrated twilight sensors, the system can employ them to control lighting.
The ADD-200 and AXD-200 temperature detectors, when operating in the corresponding mode, can inform the connected alarm control panel about the temperature exceeding the preset thresholds. In turn, the alarm control panel can respond with a programmed action, adjusting the heating level in the rooms to the expectations of household members. When the ABAX 2 system is integrated with the INTEGRA Plus alarm control panel, the temperature information sent by other devices of the wireless system (most of them feature a built-in temperature sensor) can also be used for controlling a heating/air conditioning installations.
Previous
Next
Compatibility of ABAX 2 and ABAX system devices
While introducing a new wireless system, we took care of backward compatibility. Most of the new ABAX 2 devices are supported by the legacy ABAX system controllers.
If you already own an ABAX system, but want to add more devices, use the new ABAX 2 devices.
Cooperation between devices within the ABAX 2 and ABAX systems
ABAX 2
controllers
+
ABAX 2
system devices
- full functionality of the devices
- communication in the 868 MHz frequency band – 4 channels
- increased range in open field
- detectors, sirens and expanders – up to 2000 m
- two-way control keyfobs – up to 1200 m
- keypads – up to 800 m
- up to 8 years of uninterrupted operation of battery-powered devices on a single battery
- limited functionality of the ABAX 2 devices
- communication in the 868 MHz frequency band – 1 channel*
- range – up to 500 m in open field
- no support for the ARU-200 retransmitter
* Depending on the country where the system is used, a different frequency band may be supported – ABAX 2 devices operating at 915 MHz are available.
Note: In the EU, ABAX 2 devices can operate only in the 868 MHz frequency band.
Note: In the EU, ABAX 2 devices can operate only in the 868 MHz frequency band.
ABAX
system controllers
+
ABAX
system devices
ABAX 2
system devices
ABAX 2 products
The wide range of ABAX 2 devices includes indoor and outdoor motion detectors and sirens, glass-break detectors, smoke, flood, and temperature detectors, smart home function controllers, and remote control keyfobs. There are also wireless keypads for the intruder alarm systems based on the INTEGRA, INTEGRA Plus and VERSA control panels available.
System units
Zones/outputs
expansion modules
Motions detectors
Detectors for perimeter protection
Other detectors
Control
Signalling devices
Accessories