NEW LINE OF PIR AND DUAL-TECH (PIR + MW) DETECTORS
One enclosure, many devices
Elegant, slim enclosure is made of high quality plastic.
Uniform appearance of all detectors installed in the premises makes it difficult for an intruder to identify the specific model used in the system because all of them look the same.
SLIM-PIR · SLIM-PIR-PET · SLIM-PIR-LUNA · SLIM-PIR-LUNA-PET · SLIM-PIR-PRO
SLIM-DUAL · SLIM-DUAL-PET · SLIM-DUAL-LUNA · SLIM-DUAL-LUNA-PET · SLIM-DUAL-PRO
Reliable motion detection
A unique lens
Each detector comes with a modern lens designed and manufactured in Japan – specially for SATEL. It provides a very large detection area with dimensions up to 20 m x 24 m and 90° viewing angle.
Design of the lens, as well as the material of which it was made, make it exceptionally resistant to deformation.
New motion detection algorithm
Many years of experience in the production of motion detectors and the use of the latest technologies made it possible to develop an advanced new generation algorithm of motion detection. Because of it, SLIM LINE detectors ensure reliable detection of intruders throughout the entire monitored area, without triggering unwanted alarms.
Digital temperature compensation
SLIM LINE detectors dynamically adjust the motion detection algorithm to changes in ambient temperature, so these changes do not affect the effectiveness of the detectors.
Quick lens replacement
As you can easily replace the complete front part with the lens, the SLIM LINE detectors* can be quickly and conveniently customized to suit the needs of the premises, e.g. to the shape of protected room. The wide-angle (WD) lenses are fitted as standard, but curtain (CT) and long-range (LR) lenses are also optionally available.
* except for PET detectors
DUAL – two detection
PIR and MW
Dual technology detectors, in addition to the infrared (PIR) detector, are also fitted with a microwave sensor (MW), which obviously enhances their immunity to unwanted alarms caused by rapid temperature changes in the protected room or movements of air masses within the coverage area.
Creep zone protection
An integrated tilting mirror used in the LUNA* and PRO models enables effective monitoring of the so-called creep zone, i.e. the area directly under the detector.
* except for PET detectors
Signaling covering attempts
The SLIM LINE detectors in the PRO version come with the function of active anti-masking using infrared radiation. Therefore, any attempts to disable them, for example, by covering the lens with adhesive tape or spraying paint or clear varnish on it, can be signaled.
See a presentation of SLIM LINE detectors
Quick and easy installation
Practical enclosure opening / closing mechanism
You can open the enclosure with a flat tip screwdriver, while no tools are required to close it.
Plug-in terminal block
The LUNA and PRO versions come with a plug-in terminal block. When removing the electronics board, you do not have to unscrew the wire terminals. It also allows you to quickly change the detector model.
Built-in EOL resistors
All SLIM LINE detectors have built-in end-of-line resistors designed for work with SATEL control panels (1.1 kΩ). The LUNA and PRO models are additionally provided with resistors for faster installation in systems based on other types of control panels (4.7 kΩ, 5.6 kΩ).
Adjustable wall and ceiling mounting bracket
Design of the SLIM LINE detectors allows installation directly on a flat surface. If the detector needs to be mounted at a different angle for optimal adjustment of the protected area to the room, you can use the BRACKET D mount. Thus you can adjust the detector tilt angle in two planes: up to 35° vertically and up to 90° horizontally. To meet the EN 50131 requirements for Grade 3, the PRO model bracket is provided with a tamper switch.
Additional light source
Models marked as LUNA come with additional built-in white LEDs. Consequently, these detectors can be used e.g. as motion responsive corridor lighting that can also work in the event of a power outage in the network. Lighting function can be controlled remotely or activated for a specified time when motion is detected.
Two levels of sensitivity
It is possible to remotely switch between two sets of detector sensitivity parameters. This allows you to change the motion detection settings e.g. depending on the state of the partition to which the detector is assigned. If the partition is disarmed, the detector can switch on the light in response to the slightest movement. When the partition is armed, the detector can use settings appropriate to eliminate unwanted alarms.
A very useful feature for the installer, available in the LUNA and PRO models, is the ability to remotely change the detector operating parameters using the OPT-1 keyfob. Thus, the settings (including sensor sensitivity, operating mode, indicator light and LED lighting) can be changed easily, without having to open the detector enclosure each time.
One indicator – many colors
SLIM LINE detectors offer the possibility of choosing the LED indicator color. Depending on the model, there are four or even seven colors available.
If necessary, the LED indicator can be turned off permanently.
compliance with EN 50131 Grade 2
compliance with EN 50131 Grade 3
configuring operating parameters: potentiometers
configuring operating parameters: buttons and keyfob
end-of-line resistors - 1.1 kΩ
end-of-line resistors - 4.7 kΩ, 5.6 kΩ
plug-in terminal block
electronics board protecting cover
number of available LED indicator colors
active IR anti-masking
creep zone protection
built-in LED lighting
pet immunity function
coverage area with WD lens (standard)
coverage area with LR lens
coverage area with CT lens
|SLIM-PIR||15 m x 20 m, 90°||25 m x 3,6 m||16 m x 2 m|
|SLIM-PIR-PET||12 m x 13 m, 90°||n/d|
|SLIM-PIR-LUNA||20 m x 24 m, 90°||30 m x 3,6 m||22 m x 2 m|
|SLIM-PIR-LUNA-PET||12 m x 13 m, 90°||n/d|
|SLIM-PIR-PRO||20 m x 24 m, 90°||30 m x 3,6 m||22 m x 2 m|
|SLIM-DUAL||15 m x 20 m, 90°||20 m x 3,6 m||16 m x 2 m|
|SLIM-DUAL-PET||12 m x 13 m, 90°||n/d|
|SLIM-DUAL-LUNA||20 m x 24 m, 90°||28 m x 3,6 m||22 m x 2 m|
|SLIM-DUAL-LUNA-PET||12 m x 13 m, 90°||n/d|
|SLIM-DUAL-PRO||20 m x 24 m, 90°||28 m x 3,6 m||22 m x 2 m|
SLIM-DUAL-PRO detects motion in the protected area.
- compliance with EN 50131 requirements for Grade 3
- motion detection using two sensors: a passive infrared (PIR) sensor and a microwave (MW) sensor
- adjustable detection sensitivity of both sensors
- option to test the sensors separately
- digital motion detection algorithm
- digital temperature compensation
- digital filter of signals received by the microwave sensor to ensure immunity to false alarms caused by the power network and discharge lamps
- operating mode selection: basic or advanced
- option to enable/disable the creep zone protection
- wide-angle lens, designed specifically for SLIM LINE detectors
- option to replace the wide-angle lens with a curtain (CT-CL) or long-range (LR-CL) one
- active IR anti-masking, compliant with EN 50131-2-4 for Grade 3
- ability to configure detector operating parameters using the OPT-1 keyfob
- built-in end-of-line resistors (2EOL: 2 x 1,1 kΩ / 2 x 4,7 kΩ / 2 x 5,6 kΩ)
- LED indicator
- selectable color of LED indicator (7 colors available)
- LED indicator remote enable/disable
- configuration mode remote enable/disable
- supervision of motion detection and supply voltage circuit
- tamper protection against opening of enclosure and removal from mounting
- adjustable mounting holder (BRACKET D) included, provided with tamper switch