ABAX 2 + Modbus RTU

Support for open communication protocol

Now you can easily integrate the ACU-220 and ACU-280 controllers
e.g. with automation or data acquisition systems.

The SLIM-PIR-LUNA detector

awarded in the Good Design competition

Thank you!

SMART BUILDING solutions

KNX modules

now available in SATEL's offer!

Find out more

SATEL on YouTube and Vimeo

Over 30 films and animations about us and our products

- subscribe to our channels and stay up to date!

INT-GSM

GPRS communication module

GPRS bus communication module for INTEGRA and INTEGRA Plus control panels.
Effective, safe and comfortable!

Official international

SATEL Technical Support platform

    An easy and efficient way to expand your professional knowledge:
  • instructional videos
  • intuitive systems configurators
  • technical news

Log in and start exploring now!

NEW SERIES OF ALARM CONTROL PANELS

PERFECTA

  • secure protection for apartments, small houses and small companies
  • cable, wireless or hybrid system
  • simple setup with PERFECTA Soft
  • convenient control with PERFECTA CONTROL application

SATEL MOBILE APPLICATIONS

INTEGRA CONTROL, VERSA CONTROL,
PERFECTA CONTROL, MICRA CONTROL

  • system control from any place in the world
  • quick and simple installation and setup
  • safe, encrypted sending of data Mobile transmission or Wi-Fi
  • intuitive interface which ensures convenient control over the system every day

 

Features

outdoor dual-tech curtain detectors

AGATE/AOCD-260

The alarm system is designed to protect the entire premises i.e. the building interior and the surrounding area. Security at the boundary between these two areas and along the fence of the plot is provided by curtain detectors, which belong to the group of perimeter protection devices.

Detector applications in
residential, business and industrial buildings:

  • protection of building along its outer wall
  • protection along the property fence
  • protection of entrance gate or garage door
  • outdoor and indoor protection of balcony / terrace / ordinary windows
  • detection of entry into protected zone
  • protection allowing for passage of pets

The compact and slim enclosures of the AGATE and AOCD-260 curtain detectors contain advanced technological solutions which enable a virtual wall to be created both outside of the protected buildings as well as in their interiors. The first of them is a wired device, so it can be part of any security alarm system. The other one is a wireless detector, designed to work as part of the ABAX 2 / ABAX two-way wireless system.

Detector construction

Enclosures of the detectors are made of a combination of polycarbonate and thermoplastic elastomer using two-component injection technology. The thus obtained design is IP54 rated, which makes the detectors suitable for outdoor applications as well.

The enclosure also contains elements which increase resistance of the device to mechanical impact. They include e.g. a special recess for the lens to protect it from being forced in, either accidentally or intentionally. Dual tamper protection against opening the enclosure and prying the device away from the wall is also applied. The protection is implemented using a contact on the electronics board and a tamper element on the back panel of the detector enclosure.

AGATE and AOCD-260 are provided with two detection circuits, infrared and microware, whose sensitivity can be independently and smoothly controlled. Thus, they can be adjusted both to the function performed by the device, as well as to the characteristics of the protected premises and its users' needs.

Detectors have a narrow detection angle and a large operating range: they are respectively 10° and 14 m for AGATE and 6° and 10 m for AOCD-260. The detectors’ detection area is no more than 1 m wide.

Resistance to adverse weather conditions and temperature changes

The dual technology of detection combined with the detector algorithm of auto-tuning to environmental conditions provides high immunity of these devices to false alarms. Therefore, they offer stable operation in harsh weather conditions, such as rain, snow, fog, intense insolation and strong gusts of air. Additionally, the devices feature high mechanical strength and resistance to UV radiation, hence their appearance remains unchanged for many years.

The curtain detectors offer correct operation in a wide temperature range from -40°C to +55°C. Ambient temperature changes are automatically compensated.

Easy installation

For standard applications, we recommend installing the detector at a height of 2.4 m, with the lens facing down. This height may be different, however, if the device is to be used e.g. for protection of a window or gate.

The detector can be installed either directly on a flat surface or using a dedicated bracket that allows installation of the device at a constant angle of 90°. The second option is especially useful when securing a portion of the building wall with many windows. When installing the detector inside the building, you can also use other brackets offered by SATEL.

The detector can also be used to detect an entry into the protected zone which is not secured in any other way (e.g. separated by a wall, closed doors, etc.). Alternatively, the device can be installed low and, additionally, turned. Such a solution will provide protection and, at the same time, create a gap to allow, for example, a small dog to freely move around.

AGATE

ADVANCED
INDOOR PROTECTION

Design of the AGATE detector meets the EN 50131-2-4 standard requirements for Grade 3. Therefore, the device can be used to secure the premises particularly vulnerable to burglary, which require a high degree of protection, including the jewelry shops and interiors of public buildings.

According to EN 50131-2-4, active anti-masking function is implemented in the AGATE detector infrared circuit, which provides advanced protection against, for example:

covering with fixed obstacles, including those that poorly reflect light like black and matt
covering with sticky transparent material, e.g. a film or adhesive tape
painting over with masking material, like paint or clear varnish, using retroreflective technology.

With the active IR anti-masking function, all attempts to tamper with the device will be detected immediately, appropriate information being passed to the control panel. Depending on the system configuration, notification of the situation may be sent to the user, installer, security agency or a relevant department, e.g. police.

The AGATE detector lens is secured by a retro reflector of transparent polycarbonate. Any attempt to cover it with masking material will change the refraction angle of IR rays, which will be immediately detected and signaled by the detector.

AOCD-260

WIRELESS
CURTAIN PROTECTION

AOCD-260 is a curtain detector designed to work as part of the ABAX 2/ABAX two-way wireless system. In the ABAX 2 system, it is supported by the ACU-220 and ACU-280 controllers or the ARU-200 repeater, while in the ABAX system by the ACU-120, ACU-270 controllers, the INTEGRA 128-WRL control panel or the ARU-100 repeater. Owing to its efficient energy management, the detector can work up to 8 years* without having to replace the battery. Importantly, the battery status is continuously monitored and, on detecting low voltage, the detector will sent appropriate information to the controller.

*in ECO mode, depending on the detector’s working conditions (in ABAX 2 only)

Summary of features and characteristics

AGATE AOCD-260
Two detection circuits: PIR+MW + +
Active IR anti-masking implemented in indoor applications +
Splash-proof enclosure, IP54 rated + +
Tamper protection (against opening and removal) + +
Reinforced polycarbonate enclosure + +
Digital temperature compensation for correct detector operation in temperature range from -40°C to +55°C + +
Tri-color LED + +
Working as part of ABAX 2 / ABAX wireless system +
Can work in adverse weather conditions (rain, snow, fog, strong wind) + +
Auto-tuning algorithm for high immunity to false alarms + +
Configuration of detection circuit sensitivity by using PCB potentiometers +
Remote configuration of detection circuit sensitivity from DLOADX or ABAX 2 Soft program +
Low current consumption + +
Dedicated angle-type bracket (90°) + +
Optional installation without any additional bracket + +

Characteristics

The AOCD-260 curtain detector supervises a narrow strip, only 0.6 m wide and 10 m long. The device, which detects movement when the boundary of the protected area is crossed, can be a component of perimeter protection. It works as part of the ABAX 2/ABAX two-way wireless system. The product complies with the EN 50131 Grade 2 requirements (for indoor use).

The detector has two detection paths i.e. infrared and microwave, which can be adjusted independently. The detection is based on digital signal processing supported by dynamic temperature compensation, which ensures proper functioning of the detector within the temperature range from -40°C to +55°C. AOCD-260 supervises the motion detection system and indicates any faults in its operation. The detector is characterized by high immunity to false alarms.

Configuration of the device and updating of its firmware are carried out remotely. Radio communication within the ABAX 2 system is AES encrypted.

AOCD-260 has a three-color LED which indicates, for example, violations in test mode.

The detector is powered by a CR123A 3 V battery. When the level of its charge is lower than the set value, the detector will report low battery. The "ECO" option (available in ABAX 2 only) extends the device operation time even fourfold without battery replacement.

The device has a polycarbonate enclosure (with IP54 protection rating). The detector has tamper protection against opening and removal from the mount. It can be mounted directly on the wall (Grade 2) or, alternatively, using the angle-type bracket.

  • compliance with the EN 50131 Grade 2 requirements (for indoor use)
  • two detection paths: PIR and microwave
  • detection area: 10 m x 0.6 m, angle 6°
  • high immunity to false alarms
  • advanced digital signal processing
  • dynamic compensation of temperature changes
  • compatible with:
  • range of radio communication in the open area:
    • in ABAX 2: up to 2000 m (with ACU-220) / up to 1600 m (with ACU-280)
    • in ABAX: up to 500 m
  • remote configuration and updating of the firmware
  • independently adjustable sensitivity of PIR and MW paths
  • built-in temperature sensor (temperature measurement in the range from -40°C to +55°C)
  • LED indicator of violations in test mode
  • splash-proof, weather-resistant polycarbonate enclosure with IP54 protection rating
  • low energy consumption and battery status check
  • "ECO" option for extending battery life (in ABAX 2 only)
  • power supply: CR123A 3 V battery
  • tamper protection against opening of the enclosure / removal from the mount
  • optional mounting using angle-type bracket
AOCD-260

Product card

 AOCD-260

Information materials

 Catalogue
 Technical Data
 ABAX 2
 ABAX 2 KK
 AGATE / AOCD-260

Documentation

manual
updated: 2020-02-12
194 KB

Software

Interlingue
compiled: 2020-02-06
2.01 MB

Certificates

EU declaration of conformity
updated: 2019-07-11
82 KB

Technical Data

Battery working time (in years)
up to 2
Detected target velocity
0,3...3 m/s
Operating temperature range
-40°C...+55°C
Recommended mounting height
2,4 m
Max. current consumption
26 mA
Weight
118 g
Maximum humidity
93±3%
Operating frequency band
868,0 ÷ 868,6 MHz
Battery
CR123A 3V
Standby current consumption
70 µA
Dimensions
44 x 105 x 40 mm
Environmental class according to EN50130-5
IIIa
Complied with standards
EN50131-1, EN50130-4, EN50130-5
Temperature measurement accuracy
±1°C
Microwave frequency
24,125 GHz
Warm-up period
45 s
IP code
IP54
Radio communication range (in open area) for ACU-120
up to 500 m
Radio communication range (in open area) for ACU-270
d0 500 m
Radio communication range (in open area) for ACU-220
up to 2000 m
Radio communication range (in open area) for ACU-280
up to 1600 m
Temperature measurement range
-40°C...+55°C
Detection area
10 m x 0,6 m, 6°
Security grade according to EN50131-2-4 (detector mounted directly to the wall)
Grade 2
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only.
 © 1990-2020 SATEL sp. z o.o.
legal | privacy policy | Feedback | about site

The Satel.pl website uses cookies to enable Users' to take advantage of Satel.pl features as well as for statistical purposes. Unless you block cookies, you grant your consent for their use and storage in device memory. You must remember that you are able to manage cookies by means of your browser settings. Lack of adjustment of these settings means your consent for the Satel.pl website to use the cookies. See our Privacy Policy for more information.

Zamknij