Search

July premieres 2020

We start the second half of the year by adding several interesting items to our product portfolio

New MICRA system devices

Three new products have been added to the range of MICRA wireless system devices operating in the 433 MHz frequency band: MPD-310 and MPD-310 Pet motion detectors and MRU-300 radio signal repeater.

MPD-310 and MPD-310 Pet are compatible with the PERFECTA control panels (WRL models, provided with a radio module), MICRA alarm module as well as VERSA-MCU and MTX-300 controllers. The detectors have a coverage area of up to 18×16.5 m. MPD-310 has a tilting mirror which enables control of the creep zone, while MPD-310 Pet is immune to the movement of pets weighing up to 20 kg. Both detectors are installed in new slim enclosures, already known from the SLIM LINE family detectors, as well as the APD-200 and APMD-250 wireless detectors.

The MRU-300 repeater receives radio transmissions from wireless devices and retransmits them. Thus, it allows the appropriate level of signal to be obtained between the transmitters (MICRA family detectors and MPT-350 keyfobs) and the receiver (PERFECTA control panel in WRL version, MICRA module, VERSA-MCU or MTX-300 controller). The repeater can be used, for example, where elements of the wireless installation are spaced too far apart for proper communication or where some obstacles between them are limiting the effectiveness of radio communication.

RK radio controllers

The next group of products are the RK series universal radio controllers. There are four models differing in the number of supported relay outputs (channels): 1, 2 or 4, i.e. RK-1KRK-2KRK-4K and
RK-4K SMA.
The first three of them have built-in antennas, while the last one comes with an SMA connector for connecting an external antenna.

They are intended to control devices (like barriers, gates, roller shutters, etc.) connected to the controller relay outputs by using keyfobs. Additionally, they have inputs and outputs designed to work with the control panel, therefore they can be used, for example, for remote arming and disarming of the alarm system. The controllers support the following models of keyfobs: MPT-350, MPT-300, T-4, T-2, T-1, P-4 and P-2. Each module is sold as a set with two keyfobs, respectively:

T-1 keyfobs

RK-1K

T-2 keyfobs

RK-2K

T-4 keyfobs

RK-4K/RK-4K SMA

For configuring the work of controller relay outputs and managing the keyfobs, you should use the RK Soft program.

BRACKET E modular distance holder

The OPAL family and AOD-210 outdoor motion detectors, as well as AGATE and AOCD-260 curtain detectors can now be installed using the BRACKET E modular distance holders. This way of mounting allows installation of the detector away from the wall surface by as much as ten centimeters or more to avoid the detector coverage being limited e.g. by a drain-pipe protruding from the wall, cornice, lamp, etc. Using the BRACKET E bracket, you can also install the detector e.g. on the soffit under the eaves of the roof or under the balcony.

Individual elements of the BRACKET E holder (available in white and gray) are available separately, so you can configure the holder freely to suit the requirements of your location:

BRACKET E-1

body for mounting BRACKET E-2A or BRACKET E-2B inserts

BRACKET E-2A

insert for fastening AGATE and AOCD-260 curtain detectors

BRACKET E-2B

insert for fastening OPAL and AOD-210 series detectors (with BRACKET E-5)

BRACKET E-5

ball-joint holder for OPAL and AOD-210 series detectors

BRACKET E-6

tamper sensor

Categories

Categories