INT-GSM LTE 
Features
LTE communication module for
INTEGRA and INTEGRA Plus control panels
INT-GSM LTE
The device can report events by means of cellular data transfer (TCP/UDP) or SMS messages. It can also send information about events to the persons concerned using SMS messages, CLIP service or PUSH notifications. Where INT-GSM LTE is used in conjunction with the INTEGRA Plus control panel, the e-mail messaging option is also possible. The content of all messages, regardless of how they are transmitted, is based directly on the event list and is generated automatically.
Communication with the control panel via the INT-GSM LTE module
can take place through the SATEL connection setup service.
This makes it possible to remotely:
- configure the system settings using the DLOADX program
- administer the system by using the GUARDX program
- operate the system from INTEGRA CONTROL mobile app.
Functions of the alarm system |
||||
| SMS messages |
 |
toll-free CLIP service |
|
INTEGRA CONTROL application |
2 ways of connecting
the module to the control panel
1
directly: to the keypad bus and through the RS-232 port
2
by using the ETHM-1 Plus communication module: through the RS-485 port
Combination of INT-GSM LTE and the ETHM-1 Plus communication module makes it possible to use cellular network as a spare transmission path for INTEGRA or INTEGRA Plus control panel (as an alternative to Ethernet communication). As regards the reporting function, the installer can set priorities for using individual communication paths – Dual Path Reporting – as required by the EN 50136 standard.
INT-GSM LTE
LTE communication module for INTEGRA and INTEGRA Plus- possibility of using the SATEL connection setup service
- programming control panels by using DLOADX (remote connection)
- supervision of the alarm system by using GUARDX (remote connection)
- remote system operation via INTEGRA CONTROL app
- cooperation with the INTEGRUM system (integration of multiple alarm systems based on INTEGRA and INTEGRA Plus control panels)
- reporting: cellular data (TCP/UDP), SMS messages
- possibility of cooperation with the ETHM-1 Plus Ethernet module:
- Dual Path Reporting, compliant with EN 50136
- backup communication path
- messaging: SMS, CLIP, PUSH, e-mail (INTEGRA Plus)
- remote control: SMS, CLIP, mobile application
- time synchronization with the NTP server or cellular network
- module firmware updated remotely using UpServ
- two SIM cards support
- possibility to check the pre-paid account balance
Characteristics
INT-GSM LTE is an LTE communication module that allows INTEGRA and INTEGRA Plus series of alarm control panels to communicate via 2G, 3G or 4G cellular network. The device operates on control panel’s keypad bus. It supports two SIM cards. All cellular data transfers are encrypted in the AES 192 standard.
INT-GSM LTE reports events to two monitoring stations (e.g. security agencies) via cellular network. For this purpose it uses cellular data transfer and SMS messages, with the possibility of setting the priority for each of the mentioned transmission paths.
Event notifications are created automatically based on the control panel event memory. The module sends information via SMS messages or CLIP service (up to 16 numbers) and, in case of cooperation with the INTEGRA Plus control panel, also e-mails (up to 16 addresses). After installing the INTEGRA CONTROL app on a mobile device, PUSH notifications are available.
INT-GSM LTE cooperation with INTEGRA and INTEGRA Plus control panels opens access to remote system control via:
- INTEGRA CONTROL app
- SMS messages
- costless CLIP service
- GUARDX program.
A big advantage of INT-GSM LTE device is the ability to work with the ETHM-1 Plus Ethernet module (RS-485 port connection). The duo allows for realization of Dual Path Reporting, in accordance with EN 50136, as well as for determining the priority of event monitoring tracks (Ethernet, cellular data and SMS). By default, cellular network is a backup communication channel for Ethernet.
Communication via cellular network enables wireless connection of the control panel and the computer with the installed DLOADX and GUARDX programs, and thus the configuration of the system, even from a remote location. Connection between the module and PC can be established via the SATEL connection setup service.
Module firmware updates are made via the RS-232 port or remotely, using the UpServ software (data transfer via cellular network).
Properties:
- cooperation with INTEGRA and INTEGRA Plus control panels (version 1.19 or higher)
- two SIM cards support
- possibility to check the pre-paid account balance
- time synchronization with the NTP server or cellular network
- messaging: SMS, CLIP, PUSH, e-mail (INTEGRA Plus)
- remote control: SMS, CLIP, mobile application
- reporting: cellular data (TCP/UDP), SMS messages
- possibility of cooperation with the ETHM-1 Plus Ethernet module (version 2.07 or higher):
- Dual Path Reporting, compliant with EN 50136
- backup communication path
- possibility of using the SATEL connection setup service
- remote system operation via INTEGRA CONTROL app
- Android (version 4.2.7 or higher)
- iOS (version 5.0 or higher)
- programming control panels by using DLOADX (version 1.19.004 or higher)
- supervision of the alarm system by using GUARDX (version 1.19.000 or higher) – remote connection
- cooperation with the INTEGRUM system (integration of multiple alarm systems based on the INTEGRA and INTEGRA Plus control panels)
- module firmware updated remotely using UpServ
Certificates
Technical Data
Supply voltage
12 V DC
Board dimensions
80 x 57 mm
Operating temperature range
-10...+55°C
Standby mode current consumption
110 mA
Max. current consumption
450 mA
Weight
44 g
Maximum humidity
93±3%
Environmental class according to EN50130-5
II
Information materials
1catalogue
4technical data
5product data sheet
The actual appearance of the products may differ from the presented images. Product descriptions are provided in the web service for information purposes only.