HYBRID 128 control panel is designed to protect facilities such as apartments, single-family homes, terraced houses, and small commercial premises (e.g. offices). It provides security compliant with Grade 2 requirements of the EN 50131 standard. It supports the implementation of hardwired, wireless, or hybrid systems, accommodating up to 128 devices.
The control panel mainboard is equipped with 4 hardwired zones and 4 hardwired outputs, with the option to expand the system using additional expansion modules. It features a SATEL BUS - RS-485 communication bus, allowing connection of up to 32 devices, such as keypads, card readers, and BUS detectors. It also supports ABAX 2 wireless devices compatible with the BE WAVE ecosystem, as well as so-called “virtual IP devices”. All devices within the system can be assigned to a maximum of 50 rooms.
The control panel supports full arming mode and allows configuration of up to 9 partial arming modes. Scenes and routines (up to 100 in total) enable system automation, including arming mode management and implementation of smart building functions such as lighting, heating, ventilation, roller shutter, and gate control.
The control panel is equipped with Ethernet and Wi-Fi communication modules. These enable system control via the BE WAVE mobile app, connection to the BE WAVE Soft configuration software, and event reporting to a monitoring station.
- compliance with EN 50131 Grade 2
- support for up to 128 hardwired, wireless, and virtual IP devices
- hardwired devices
- bus devices connected to the SATEL BUS (RS-485) communication bus (up to 32 physical devices)
- devices connected to the system's zones and outputs
- ABAX 2 system wireless devices
- operation in the 868 MHz frequency band
- AES encrypted two-way radio communication
- transmission channel diversity – 4 channels for automatic selection of the one that will enable transmission without interference with other signals
- additional transmission channel to receive images from the Motion Detector Cam
- virtual IP devices
- IP zones (receiving HTTP notifications)
- IP outputs (sending HTTP notifications)
- capability to assign devices to 50 rooms
- capability to arm the system fully or partially (9 configurable partial modes)
- comunication bus - SATEL BUS (RS-485) for connecting up to 32 devices
- INT-TSH210, INT-TSH2R, INT-TSG2R touchscreen keypads
- SO-MF5 keypad with MIFARE® proximity card reader
- SO-MF3 MIFARE® proximity card reader
- INT-E, INT-O, INT-ORS, INT-PP, INT-IORS expansion modules
- BUS detectors
- TPH-2 sensor
- hardwired zones
- 4 zones on the control panel mainboard
- capability to increase the number of hardwired zones using expanders
- support for configuration: EOL, 2EOL, 3EOL
- support for NO and NC detectors, as well as roller shutter and shock detectors
- programmable value of end-of-line resistors
- hardwire outputs
- 4 outputs on the control panel mainboard
- capability to increase the number of hardwired outputs using expanders
- built-in modules
- Ethernet (reporting to monitoring station, mobile application, push and e-mail notifications)
- WiFi 2,4 and 5 GHz (reporting to monitoring station, mobile application, push and e-mail notifications)
- system control using
- BE WAVE mobile application (simultaneous access by multiple users)
- BE WAVE Soft configuration software
- touchscreen keypads
- keypads
- remote control keyfobs
- 13,56 MHz MIFARE® proximity cards and tags
- up to 50 users
- up to 100 scenes and routines
- up to 50 schedules with option to be used for routines
- 8000 event log entries
- automatic diagnostics of basic system components
- powered by 12 V DC – power supply connected to APS connector (eg. APS-412)
- capability to update firmware of the control panel and the devices in the system
- programming of control panel setting
- BE WAVE Soft configuration software or BE WAVE mobile app
- communication via the local network or connection established through the Internet using the SATEL server
